Peugeot 408 Debuts In China

No,it is not the successor to the sleek 407 sedan (thank god). It is actually a 308 with a tail according to Peugeot. The rear is a let down in comparison to other models in the peugeot range. Here is the story from Paultan :

The new Peugeot 408 is actually a C-segment notchback sedan based on the C-segment Peugeot 308 platform, but with its wheelbase lengthened to give better interior room since it is a 4-door. Suspension settings have also been revised for the car’s new sedan weight and for a more comfort-biased setup. In China, its positioned against other C-segment sedans like the Civic and the Focus. And this time Peugeot seems to have gotten the ‘hatch to sedan’ conversion right – it looks a lot less awkward than the 206 Sedan.

The 408 measures 4,680mm long, 1,800mm long and 1,500mm wide. It has a wheelbase of 2,710mm which trumps the Civic’s throne as the longest wheelbase C-segment vehicle available right now (well not exactly – the Fluence wheelbase is said to be 2,702mm). It approaches CD-segment territory with that wheelbase length (the Pug 407’s wheelbase is 2,725mm)! This should mean pretty good interior room in theory.

The Chinese launch of the car introduces a two engine line-up – a 110hp 1.6 liter engine and a 147hp 2.0 liter engine. Different markets may get different engines. The 1.6 liter engine’s 110 horses is reached at 5,750rpm while peak torque of 147Nm is reached at 4,000rpm with 85% reached from just 2,000rpm. and 95% (140Nm) between 3,000rpm and 5,500rpm. That’s a good and wide torque spread. The 2.0 liter unit is equipped with continuously variable valve timing. It produces its peak power at 6,000rpm with peak torque of 200Nm reached at 4,000rpm.

The transmission options are either a 5-speed manual or a 4-speed automatic, which is the new AT8 Porsche Tiptronic system model. Not the same one as found in the 206 or the 308, which is the AL4. The AT8 uses a torque converter by ZF which improves gearbox output and reduces consumption by about 5%. The gearbox management can also lock the three higher gears to reduce torque converter slip during gentle driving.